Ricoh J2SS 기술 게시판 - 페이지 4
{카테고리_이름} Ricoh J2SS에 대한 기술 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh J2SS 17 페이지.
페이지 인쇄
REVISED ON: DECEMBER 15, '95
SUBJECT: Energy Star
SP Mode
The following two modes have been newly provided (ROM : A163-5208).
Mode No.
Auto off time can be selected
15
The auto off time can also be selected by the customer.
Please refer to pages 3 and 4 of this RTB for the procedure.
The Auto off mode is prohibited in the following conditions.
* The roll feeder is operating.
* A sheet of paper is set on the feed table.
* A Jam or SC indicator in on.
* Toner end indicator is on or Used Toner bottle is full.
Instruction Sheet
An additional explanation sheet has been added to the operating instructions booklet.
Please refer to pages 3 and 4 of this RTB for the contents of this sheet. The Energy
Saver Mode described on the second page of this instruction sheet is the Auto Energy
Saver Mode originally available with this copier.
Note: 1. When you use the new main board (main board modified for Energy Star) in a
non-Energy Star machine, please replace the ROM with the ROM
(A163-9506).
2. When you replace the RAM board, please clear all memories with SP mode -1
-21 and input the factory data refering to the service manual. (Memory clear
mode section)
Technical Bulletin
Function
: Revised
*
Settings
1 ~ 120 minute (1 minute per step)
Default : 30 minutes
No. RTB-003
DATE:October 31,
'95
PAGE: 2 of 4
*
*