Ricoh Savin CLP135 Handbuch zur Produktunterstützung - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch zur Produktunterstützung für Drucker Ricoh Savin CLP135 herunter. Ricoh Savin CLP135 25 Seiten. Product guide
Seite drucken
G130/G131 Product Support Guide
Printing Envelopes (Cont.)
Paper thickness 72 - 90 g/m2 (19 - 24 lb.)
Recommended weight and size
• Inch version
24 lb, Com 10
Note: Make sure paper is not stacked higher than the paper guides inside the bypass tray.
Printing on both-sides is not possible
Do not place envelopes of differing sizes at the same time.
.
You can place envelopes in short-edge feeding orientation, but this might result in creasing
Printer Driver Settings
In the [Paper source tray] list, click [Bypass tray], and then in the [Paper type] list, click [Thick].
To set the print size, in the [Original size] list, click [Com10 Env.] or [Monarch Env.], and then in
the [Printout paper size] list, click [Same as original size].
Limitations
· Surface bumps may occur around stuck-down and overlapping areas.
· Print positioning is easier with Com10 type envelopes than with the Monarch type.
· If envelopes are bent or creased and do not feed in smoothly, paper jams may occur.
· No more than 10 envelopes should be placed on the bypass tray at a time.
· Envelopes should be printed under the normal temperature and humidity.
Version – 1.0