Epson EMP 30 - PowerLite 50c XGA LCD Projector Informationen zum Produkt - Seite 10
Blättern Sie online oder laden Sie pdf Informationen zum Produkt für Projektor Epson EMP 30 - PowerLite 50c XGA LCD Projector herunter. Epson EMP 30 - PowerLite 50c XGA LCD Projector 13 Seiten. Epson powerlite 70c: quick start
Auch für Epson EMP 30 - PowerLite 50c XGA LCD Projector: Spezifikationen (2 seiten), Schnelles Einrichten (2 seiten)
EPSON Powerlite 50c/70c
Using the Menus
These on-screen menus let you adjust and customize the
projector features from the remote control:
controls the look and quality of the projected image
Video
(from a computer or video source).
adjusts the sound volume and tone.
Audio
customizes the highlighting tools available on the
Effect
remote control.
adjusts features such as the keystone setting, blank
Setting
screen color, message prompt, and sleep mode.
controls settings such as menu language, color
Advanced
intensity, and rear or ceiling projection.
provides information about the current projector and
About
lamp settings, and lets you reset the lamp timer when you've
replaced the projector's lamp.
restores the factory defaults to all the projector
Reset All
settings.
Changing Menu Settings
You use the
,
and
Menu
Enter
control to change menu settings.
1. To display the main menu, press the
menus are displayed on the left, and the options available for
the current menu are shown on the right.
2. Press the top or bottom of the
down through the menus and view the available options.
3. Press the center of the
Enter
highlight moves to the first menu option for that menu.
4. Press the bottom or the top of the
through the options. Press the right or left side of the
button to change the setting.
If you want to go back to the default settings on any menu,
select
, press
Reset
Enter
5. Press the
button to save your changes and go back to the
Esc
main menu.
6. Press the
button to exit the menu system.
Menu
10 - EPSON Powerlite 50c/70c
buttons on the remote
Esc
button. The
Menu
button to scroll up or
Enter
button to select a menu. The
button to scroll
Enter
, select
, and then press
Yes
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
To remove dust, use a canister of compressed air to spray the
lens surface, or lightly wipe the lens surface with a soft, dry,
lint-free cloth.
To remove dirt or smears, use lens-cleaning paper. If
necessary, moisten a soft cloth with an alcohol-based cleaner
and gently wipe the lens surface.
Clean
here
Cleaning the Projector Case
Before you clean the projector case, turn off the projector and
unplug the power cord.
To remove dirt or dust, wipe the outside with a soft, dry,
lint-free cloth.
To remove stubborn dirt or stains, clean the case using a soft
cloth moistened with water and a neutral detergent. Dry it
using a separate cloth.
Do not use alcohol, benzene, thinner, wax, or other
chemicals. These can damage the case.
Enter
Cleaning the Air Intake Vent
Clean the air intake vent after every 100 hours of use, or if the
.
Enter
light on top of the projector turns red.
Error
If the vent is not cleaned periodically, it can become clogged
with dust, preventing proper ventilation. This can cause
overheating and damage the projector.
01/01