Cisco 2950 - Catalyst Switch Handbuch "Erste Schritte - Seite 17

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Netzwerk-Router Cisco 2950 - Catalyst Switch herunter. Cisco 2950 - Catalyst Switch 29 Seiten. Long-reach ethernet switches
Auch für Cisco 2950 - Catalyst Switch: Lösungshandbuch (17 seiten), Produkt-Bulletin (3 seiten), Produkt-Support-Bulletin (5 seiten), Handbuch zur Migration (25 seiten), Produkt-Support-Bulletin (6 seiten), Datenblatt (20 seiten), Handbuch (19 seiten)

Slide the exposed area of the 6-gauge wire

Step 3

into the ground lug, and use the crimping

tool to crimp the lug to the wire.

Step 4

Using the ratcheting screwdriver, torque the ground lug screws to 15 lbf-in. (240

ounce-force inches [ozf-in.]) to attach the ground lug to the switch.

Wiring the DC Input Power Source

Follow these steps:

On the terminal block connector, identify the positive and negative feed positions.

Step 1

Strip each of the four wires coming from the

Step 2

DC power source to 0.27 inch (6.6 mm)

± 0.02 inch (0.5 mm). Do not strip more

than the recommended amount of wire.

Insert the four exposed wires from the DC-input power source into the terminal block plug,

Step 3

matching positive to positive and negative to negative for both the A and the B feed wires.

CO NS OL

0.27 inch (6.6 mm)