Cisco 2950 - Catalyst Switch Panduan Memulai - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Router Jaringan Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 29 halaman. Long-reach ethernet switches
Juga untuk Cisco 2950 - Catalyst Switch: Panduan Solusi (17 halaman), Buletin Produk (3 halaman), Buletin Dukungan Produk (5 halaman), Panduan Migrasi (25 halaman), Buletin Dukungan Produk (6 halaman), Lembar data (20 halaman), Manual (19 halaman)

Slide the exposed area of the 6-gauge wire

Step 3

into the ground lug, and use the crimping

tool to crimp the lug to the wire.

Step 4

Using the ratcheting screwdriver, torque the ground lug screws to 15 lbf-in. (240

ounce-force inches [ozf-in.]) to attach the ground lug to the switch.

Wiring the DC Input Power Source

Follow these steps:

On the terminal block connector, identify the positive and negative feed positions.

Step 1

Strip each of the four wires coming from the

Step 2

DC power source to 0.27 inch (6.6 mm)

± 0.02 inch (0.5 mm). Do not strip more

than the recommended amount of wire.

Insert the four exposed wires from the DC-input power source into the terminal block plug,

Step 3

matching positive to positive and negative to negative for both the A and the B feed wires.

CO NS OL

0.27 inch (6.6 mm)