Cisco 2950 - Catalyst Switch Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Netzwerk-Router Cisco 2950 - Catalyst Switch herunter. Cisco 2950 - Catalyst Switch 19 Seiten. Long-reach ethernet switches
Auch für Cisco 2950 - Catalyst Switch: Lösungshandbuch (17 seiten), Produkt-Bulletin (3 seiten), Produkt-Support-Bulletin (5 seiten), Handbuch zur Migration (25 seiten), Produkt-Support-Bulletin (6 seiten), Handbuch "Erste Schritte (29 seiten), Datenblatt (20 seiten)

Cisco - Connecting a Terminal to the Console Port on Catalyst Switches

number is CAB-S3-CONSOLE=.

Note: The auxiliary (AUX) port is not supported.

Figure: EIA/TIA-232 RJ-45 Adapter Cable Connector

Table E-1: Supervisor Engine III Console Port Pinouts RJ45-to-DB25 Adaptor Cable

RJ45 on Switch Console

(DTE) (Uses straight through

cable.)

1 RTS (looped to pin 8)

2 DTR

3 RxD

4 GND

5 GND tied to 4

6 TxD

7 DSR

8 CTS (looped to pin 1)

Table E-2: Supervisor Engine III Console Port Pinouts RJ45-to-DB9 Adaptor Cable

RJ45 on Switch Console (DTE)

(Uses straight through cable.)

1 RTS (looped to pin 8)

2 DTR

3 RxD

4 GND

5 GND tied to 4

6 TxD

7 DSR

8 CTS (looped to pin 1)

Configuring a Terminal for Attachment to the Console Port

Note: The console port is an asynchronous (Async) serial port; any device connected to this port must be

capable of asynchronous transmission.

http://www.cisco.com/warp/public/473/9.html (10 of 19) [9/4/2003 12:36:03 PM]

DB25 on Terminal (DTE)

6 DSR

2 TxD

7 GND

3 RxD

20 DTR

DB9 on Terminal (DTE)

6 DSR

3 TxD

5 GND

2 RxD

4 DTR