Epson EMP-TS10 Setup-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Projektor Epson EMP-TS10 herunter. Epson EMP-TS10 22 Seiten. Home theatre projector
Auch für Epson EMP-TS10: Betriebshandbuch (36 seiten), Spezifikationen (1 seiten), Handbuch zum Auspacken und zur Installation (2 seiten)

The projector cannot be connected to some types of computer, or projection of images

may not be possible even if actual connection is possible. Make sure that the computer

you intend to use satisfies the conditions given below.

Condition 1: The computer must have a image signal output port.

Check that the computer has a port such as an RGB port, monitor port or CRT port which

can output image signals. If the computer has a built-in monitor, or if using a laptop

computer, it may not be possible to connect the computer to the projector, or alternatively

you may need to purchase a separate external output port. Refer to the documentation for

your computer under a heading such as "Connecting an external monitor" or similar for

further details.

Condition 2: The display resolution and frequency of the computer must be listed

in the "Appendices - List of Supported Signal Resolutions".

Some computers may have functions for changing the output resolution. For details, refer

to the section of the documentation provided with your computer and change the setting to

within a range given in the list of supported resolutions.

Turn off the power for both the projector and the computer before connecting them. If

the power for either device is on at the time of connection, damage may result.

Check the shapes of the cable connectors and the device ports before making the

connections. If you try to force a connector to fit a device port with a different shape

or number of terminals, damage to the connector or port may result.

You may need to purchase a separate adapter to connect the

computer to the projector, depending on the shape of the computer's

monitor port. For details, refer to the section of the documentation

provided with your computer.

The commercially available adapter set is required in order to connect

the projector to a Macintosh computer.