Samsung 29A750 Gebrauchsanweisung für den Besitzer - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für den Besitzer für TV Samsung 29A750 herunter. Samsung 29A750 9 Seiten.

Seite drucken
Sound -
Mode / Adjust /
Auto Volume / Turbo Sound
◆ Mode: Standard/Music
TV
/Movie/Speech/Custom
Mode
You can select the type of
Adjust
Auto Volume
special sound effect to be
Turbo Sound
used when watching a given
broadcast.
➢
You can select these
Move
options simply by
pressing the S.MODE button on the remote control.
◆ Adjust: Bass / Treble / Balance
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
◆ Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.

Selecting the Sound Mode

(depending on the model)
The DUAL I-II button
displays/controls the processing
Sound
and output of the audio signal.
: Standard
√ √
When power is switched on, the
√ √
: Off
√ √
mode is automatically preset to either "Dual-I " or "Stereo",
√ √
: Off
depending on the current transmission.
Enter
Exit
◆ NICAM Stereo
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
◆ A2 Stereo
Type of broadcast
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
Mono
(Normal use)
Mono
Mono
↔
NICAM
(Normal)
Stereo
Mono
↔
NICAM
(Normal)
Dual-I
Dual-II
Mono
↔
↔
NICAM
NICAM
(Normal)
On-screen indication
Mono
(Normal)
↔
Dual-I
Dual-II
Mono
↔
Stereo
(Forced mono)
English - 6
➢
◆ If the receiving conditions deteriorate, listening will
be easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode,
connect to the "AUDIO-L" input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.