Samsung 29A750 Owner's Instructions Manual - Page 6

Browse online or download pdf Owner's Instructions Manual for TV Samsung 29A750. Samsung 29A750 9 pages.

Print Page

1. Troubleshooting

Sound -

Mode / Adjust /

Auto Volume / Turbo Sound

◆ Mode: Standard/Music

/Movie/Speech/Custom

Mode

You can select the type of

Adjust

Auto Volume

special sound effect to be

Turbo Sound

used when watching a given

broadcast.

➢

You can select these

Move

options simply by

pressing the S.MODE button on the remote control.

◆ Adjust: Bass / Treble / Balance

The television has several settings which allow you to

control the sound quality.

➢

If you make any changes to these settings, the

sound mode is automatically switched to Custom.

◆ Auto Volume

Each broadcasting station has its own signal conditions,

and so it is not easy to adjust the volume every time the

channel is changed. This feature lets you automatically

adjust the volume of the desired channel by lowering the

sound output when the modulation signal is high or by

raising the sound output when the modulation signal is

low.

◆ Turbo Sound

This feature suitably emphasizes both higher and lower

bands of sound (and includes other effects). You can

enjoy more magnificent and dynamic sound when

watching music, movie, or other channels.

➢

You can change the options simply by pressing the

TURBO button on the remote control.

Selecting the Sound Mode

(depending on the model)

The DUAL I-II button

displays/controls the processing

Sound

and output of the audio signal.

: Standard

√ √

When power is switched on, the

√ √

: Off

√ √

mode is automatically preset to either "Dual-I " or "Stereo",

√ √

: Off

depending on the current transmission.

Enter

Exit

◆ NICAM Stereo

Type of broadcast

Regular broadcast

(Standard audio)

Regular +

NICAM Mono

NICAM Stereo

NICAM Dual-I/II

◆ A2 Stereo

Type of broadcast

Regular broadcast

(Standard audio)

Bilingual or Dual-I/II

Stereo

On-screen indication

Mono

(Normal use)

Mono

↔

NICAM

(Normal)

Stereo

Mono

↔

NICAM

(Normal)

Dual-I

Dual-II

Mono

↔

NICAM

(Normal)

On-screen indication

Mono

(Normal)

↔

Dual-I

Dual-II

Mono

↔

Stereo

(Forced mono)

English - 6

➢

◆ If the receiving conditions deteriorate, listening will

be easier if the mode is set to the Mono.

◆ If the stereo signal is weak and an automatic

switching occurs, then switch to the Mono.

◆ When receiving a mono sound in the AV mode,

connect to the "AUDIO-L" input connector on the

panel (front or side). If the mono sound comes out

only from left speaker, press the DUAL I-II button.