CAB HEKTOR 4 Betriebshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Water Filtration Systems CAB HEKTOR 4 herunter. CAB HEKTOR 4 8 Seiten. Strip separator
3
Fig. 2 Power supply
Connection of a suction device
- Connect the tube of the suction device with the suction pipe (3) on the side of the strip
separator.
- Make the electrical connection with the industrial vacuum cleaner. Put the power cable of
the cleaner into the socket (5) of the HEKTOR 4.
- Connect the device with an earthed socket. Use the delivered power cable. Put this cable
into the power module (4).
- Now it is possible to switch on and off the suction device on the switch of the strip seperator.
6. Operation
Fig. 3 Separation
- Slide the PCB (8) to be separated with the pre-scored groove from the top to the blades.
Place the strips at the matrices (12) and slide they against the blades.
- Activate the separation by actuating both hand switches (7) on the sides of the strip
separator.
- Remove the separated boards.
By using a suction device the rests will be disposed permanently.
4
7
8
4
5
7