CAB HEKTOR 4 Kullanım Kılavuzu - Sayfa 4

Su Filtrasyon Sistemleri CAB HEKTOR 4 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CAB HEKTOR 4 8 sayfaları. Strip separator

Fig. 2 Power supply

Connection of a suction device

- Connect the tube of the suction device with the suction pipe (3) on the side of the strip

separator.

- Make the electrical connection with the industrial vacuum cleaner. Put the power cable of

the cleaner into the socket (5) of the HEKTOR 4.

- Connect the device with an earthed socket. Use the delivered power cable. Put this cable

into the power module (4).

- Now it is possible to switch on and off the suction device on the switch of the strip seperator.

6. Operation

Fig. 3 Separation

- Slide the PCB (8) to be separated with the pre-scored groove from the top to the blades.

Place the strips at the matrices (12) and slide they against the blades.

- Activate the separation by actuating both hand switches (7) on the sides of the strip

separator.

- Remove the separated boards.

By using a suction device the rests will be disposed permanently.