CAB SQUIX CSQ 400 Montageanleitung Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Kutter CAB SQUIX CSQ 400 herunter. CAB SQUIX CSQ 400 20 Seiten.

Operation

3.1

 Slide lever (1) to the left to fold down the cutter unit (2).

 Insert labels for tear-off mode  Instructions of the printer.

Place the media strip between the printhead and the drive roller, so that

the front edge of the strip reaches through the cutter.

 Insert ribbon  Instructions of the printer.

 Fold up and lock the cutter unit (2).

 Activate the cut mode in the software.

In direct programming use the "C" command.

 Programming Manual of the printer.

 Configure the cut parameters  4. Printer Configuration

Note!

The cut parameters are only accessible with cutter installed.