CAB SQUIX CSQ 400 조립 지침 매뉴얼 - 페이지 11

{카테고리_이름} CAB SQUIX CSQ 400에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB SQUIX CSQ 400 20 페이지.

Operation

3.1

 Slide lever (1) to the left to fold down the cutter unit (2).

 Insert labels for tear-off mode  Instructions of the printer.

Place the media strip between the printhead and the drive roller, so that

the front edge of the strip reaches through the cutter.

 Insert ribbon  Instructions of the printer.

 Fold up and lock the cutter unit (2).

 Activate the cut mode in the software.

In direct programming use the "C" command.

 Programming Manual of the printer.

 Configure the cut parameters  4. Printer Configuration

Note!

The cut parameters are only accessible with cutter installed.