Epson AcuLasaer C1900 Kurzreferenz-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Alles in einem Drucker Epson AcuLasaer C1900 herunter. Epson AcuLasaer C1900 17 Seiten.

Seite drucken

To clear this error, select Clear Warning

from the control panel's Reset Menu. See

"How to access the control panel menus" for

instructions.

HDD Check

The printer is checking the Hard Disk Drive.

Image Optimum

There is insufficient memory to print the

page at the specified print quality. The

printer automatically lowers the print

quality so that it can continue printing. If the

quality of the printout is not acceptable, try

simplifying the page by limiting the number

of graphics or reducing the number and size

of fonts.

To clear this error, select Clear Warning

from the control panel's Reset Menu. See

"How to access the control panel menus" for

instructions.

Turn the Image Optimum setting off on the

control panel's Printing Menu if you do not

want the printer to automatically lower the

print quality to continue printing.

You may need to increase the amount of

printer memory to be able to print at the

desired print quality for your document. For

more information on adding memory, see

"Memory module" in the Reference Guide.

Install Photocondctr

There is no photoconductor unit installed or

the photoconductor unit is not installed

properly. Install the photoconductor unit if

it is not installed.

EPSON AcuLaser C1900 Quick Reference

If a photoconductor unit is already installed,

open the front cover, then remove the waste

toner collector. Remove the photoconductor

unit, then reinstall it correctly. Reinstall the

waste toner collector, and close the front

cover. The error clears automatically if the

photoconductor unit is installed correctly.

Install Waste T Box

The waste toner collector is not installed, or

is installed incorrectly. If there is no waste

toner collector installed, install one in the

printer. If there is a waste toner collector

already installed, try removing it and

reinstalling it. See "Replacing the waste

toner collector" in the Reference Guide for

instructions.

Invalid AUX I/F Card

This message means that the printer cannot

communicate with the installed optional

interface card. Turn off the printer, remove

the card, then reinstall it.

Invalid HDD

Either the optional Hard Disk Drive is

damaged or it cannot be used with this

printer. Turn off the printer and remove the

Hard Disk Drive.

Invalid PS3

An optional PostScript 3 ROM module that

cannot be used on this printer is installed.

Turn off the printer and remove the module.

Invalid ROM A

The printer cannot read the installed

optional ROM module. Turn off the printer

and remove the ROM module.

Status and Error Messages (3/7)