Epson AcuLasaer C1900 Kurzreferenz-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Alles in einem Drucker Epson AcuLasaer C1900 herunter. Epson AcuLasaer C1900 17 Seiten.

Seite drucken

Collate disabled

Printing by specifying the number of copies

is no longer possible due to a lack of memory

(RAM) or free disk space on the optional

Hard Disk Drive. If this error occurs, print

only one copy at a time.

To clear this error, select Clear Warning

from the control panel's Reset Menu. See

"How to access the control panel menus" for

instructions.

Cooling Down

The printer lowers its temperature to

optimize for the fixing toner. Wait for a

moment for Ready to appear in the LCD

panel.

Cover C Open

Cover C of the optional 500-Sheet Paper

Cassette Unit is open. Close the cover.

Duplex Mem Overflow

There is not enough memory for duplex

printing. The printer prints only on the front

and ejects the paper. To clear this error,

follow the instructions below.

If Off is selected as the Auto Cont setting on

the control panel's Setup Menu, press the

Start/Stop button to print on the back of the

next sheet, or press the

to cancel the print job.

If On is selected as the Auto Cont setting on

the control panel's Setup Menu, printing

continues automatically after a certain

period of time.

Cancel Job button

EPSON AcuLaser C1900 Quick Reference

Format Error ROM A

An unformatted ROM module has been

inserted. If the ROM module has been

formatted, but is still unreadable, format it

again. If the ROM is still unreadable after

reformatting, take the module to your dealer

for repair or replacement.

To clear this error, either press the Start/Stop

button or turn off the printer and remove the

ROM module.

Formatting HDD

The printer is formatting the optional Hard

Disk Drive.

Form Data Canceled

Unable to store form overlay data on the

printer's Hard Disk Drive. Either the drive is

full, or the maximum number of form

overlay files has been reached. Delete any

form overlay files you no longer need, then

try storing the new overlay again.

To clear this error, select Clear Warning

from the control panel's Reset Menu. See

"How to access the control panel menus" for

instructions.

Form Feed

The printer is ejecting paper due to a printing

error. This message appears when the

Start/Stop button has been held down for

more than 2 seconds in order to recover from

a printing error.

Hard Disk Full

The printer has insufficient memory. Delete

the unnecessary data from the Hard Disk

Drive.

Status and Error Messages (2/7)