Epson AcuLasaer C1900 Hızlı Referans Kılavuzu - Sayfa 3
Hepsi Bir Arada Yazıcı Epson AcuLasaer C1900 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Epson AcuLasaer C1900 17 sayfaları.
Sayfayı YazdırCollate disabled
Printing by specifying the number of copies
is no longer possible due to a lack of memory
(RAM) or free disk space on the optional
Hard Disk Drive. If this error occurs, print
only one copy at a time.
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
Cooling Down
The printer lowers its temperature to
optimize for the fixing toner. Wait for a
moment for Ready to appear in the LCD
panel.
Cover C Open
Cover C of the optional 500-Sheet Paper
Cassette Unit is open. Close the cover.
Duplex Mem Overflow
There is not enough memory for duplex
printing. The printer prints only on the front
and ejects the paper. To clear this error,
follow the instructions below.
If Off is selected as the Auto Cont setting on
the control panel's Setup Menu, press the
Start/Stop button to print on the back of the
next sheet, or press the
to cancel the print job.
If On is selected as the Auto Cont setting on
the control panel's Setup Menu, printing
continues automatically after a certain
period of time.
Cancel Job button
EPSON AcuLaser C1900 Quick Reference
Format Error ROM A
An unformatted ROM module has been
inserted. If the ROM module has been
formatted, but is still unreadable, format it
again. If the ROM is still unreadable after
reformatting, take the module to your dealer
for repair or replacement.
To clear this error, either press the Start/Stop
button or turn off the printer and remove the
ROM module.
Formatting HDD
The printer is formatting the optional Hard
Disk Drive.
Form Data Canceled
Unable to store form overlay data on the
printer's Hard Disk Drive. Either the drive is
full, or the maximum number of form
overlay files has been reached. Delete any
form overlay files you no longer need, then
try storing the new overlay again.
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
Form Feed
The printer is ejecting paper due to a printing
error. This message appears when the
Start/Stop button has been held down for
more than 2 seconds in order to recover from
a printing error.
Hard Disk Full
The printer has insufficient memory. Delete
the unnecessary data from the Hard Disk
Drive.
Status and Error Messages (2/7)