Cisco Catalyst 9130AX Series Handbuch "Erste Schritte - Seite 26

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Drahtloser Zugangspunkt Cisco Catalyst 9130AX Series herunter. Cisco Catalyst 9130AX Series 49 Seiten.

Seite drucken

Cisco Catalyst 9130AX Series Access Points

M ounting the Access Point

Cisco Catalyst 9130AX series access points can be mounted in several configurations – on a suspended ceiling, on a

hard ceiling or wall, on an electrical or network box, and above a suspended ceiling.

For access point mounting instructions, go to the following URL:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mounting/guide/apmount.html

The standard mounting hardware supported by the AP is listed in

Table 2

Brackets and Clips for M ounting the AP

123

Brackets

Clips

1. Mount the AP using no less than four screw holes on a bracket.

2. AIR-AP-BRACKET-3 is not compatible for use with Cisco Catalyst 9130AX series access points.

3. You can also use "in-tile" mounting options available from third parties. For more information, visit the

access point data sheet available on Cisco.com at

https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/nb-06-cat-

9130-ser-ap-ds-cte-en.html.

When mounting the AP in areas where there is a possibility of the AP being knocked off the mounting bracket, use the

lock hasp on the back of the AP (see

Part Number

Description

AIR-AP-BRACKET-1

Low-profile bracket—Used for ceiling mount

installations

(This is the default option.)

AIR-AP-BRACKET-2

Universal bracket—Used for wall or electrical box

installations.

AIR-AP-BRACKET-9=

Antenna bracket to mount the C9130AXE directly to

the back of the C-ANT9103= antenna

AIR-AP-T-RAIL-R

Ceiling Grid Clip (Recessed mounting)

(This is the default option)

AIR-AP-T-RAIL-F

Ceiling Grid Clip (Flush mounting)

AIR-CHNL-ADAPTER

Optional adapter for channel-rail ceiling grid profile.

Figure

16) to lock it to the bracket.

Table