Caberg Just SpeakS Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für Motorräder Caberg Just SpeakS herunter. Caberg Just SpeakS 14 Seiten. Bluetooth headset & intercom for scooters and motorcycles
Seite drucken
JUST SPEAK S
The voice prompts for each menu item are as below:
(1) VOX phone
(2) Voice prompt
(3) Delete all pairings
(4) Factory reset
(5) Exit configuration
Enabling/Disabling Voice Activated Phone Answering
Voice Prompt
"VOX phone"
Factory Default
Enable
Enable / Disable
Press the (-) Button
If this feature is enabled, you can answer incoming calls by simply saying a
word loudly enough, unless you are connected to intercom. For example,
when you hear a series of beeps for an incoming call, you can answer the
phone by saying "Hello" or any other word loudly. However, the phone VOX
feature does not work if you are connected to intercom. This is enabled
from the factory but you can disable this. If this mode is disabled, you have
to press the (+) Button to answer an incoming call.
18
Enabling/Disabling Voice Prompts
Voice Prompt
"Voice prompt"
Factory Default
Enable
Enable / Disable
Press the (-) Button
You can disable voice prompts by configuration setting, but the following
voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
Delete All Bluetooth Pairing Information
Voice Prompt
"Delete all pairings"
Factory Default
N/A
Execute
Press the (-) Button
To delete all Bluetooth pairing information of the Just Speak S, press and
hold the (+) Button until you hear a voice prompt, "Delete all pairings",
and press the (-) Button to confirm.
Reset to Factory Default Setting
Voice Prompt
"Factory reset"
Factory Default
N/A
Execute
Press the (-) Button
To restore factory default settings on the Just Speak S, press and hold
the (+) Button until you hear a voice prompt, "Factory reset". Press the
(-) Button to confirm. The Just Speak S powers off with a voice prompt,
"Headset reset, goodbye".
Exit Voice Configuration Menu
Voice Prompt
"Exit configuration"
Factory Default
N/A
Execute
Press the (-) Button
To exit voice configuration menu and get back to stand-by mode, press and
hold the (+) Button until you hear a voice prompt, "Exit configuration".
Press the (-) Button to confirm.
JUST SPEAK S
Press (+) Button
Press (-) Button
"Vox phone"
Enable / disable
"Voice prompt"
Enable / disable
"Delete all pairings"
Execute
"Factory reset"
Execute
"Exit configuration"
Execute
Voice Configuration Menu & Button Operations
19