Cisco NCS 4201 Handbuch zur Installation - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch zur Installation für Drahtloser Zugangspunkt Cisco NCS 4201 herunter. Cisco NCS 4201 42 Seiten.
Seite druckenAttaching the Cable Guides
To install the cable guides, perform these steps:
Step 1
Position the cable brackets (left and right) against the side of the chassis and align the four screw holes, as shown in
figure below using standard kit.
Step 2
Secure the cable brackets with the four M6x12mm screws supplied with the cable kit. The recommended maximum
torque is 3N-m.
Figure 4: Installing the Cable Brackets on Cisco NCS 4201 (As Per the Standard Kit)
Figure 5: Guiding the Cables from the Front Panel through the Cable Brackets
Cisco NCS 4201 Hardware Installation Guide
6
Installing the Cisco NCS 4201