Cisco NCS 4201 Manuale di installazione - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione per Punto di accesso wireless Cisco NCS 4201. Cisco NCS 4201 42.
Stampa la paginaAttaching the Cable Guides
To install the cable guides, perform these steps:
Step 1
Position the cable brackets (left and right) against the side of the chassis and align the four screw holes, as shown in
figure below using standard kit.
Step 2
Secure the cable brackets with the four M6x12mm screws supplied with the cable kit. The recommended maximum
torque is 3N-m.
Figure 4: Installing the Cable Brackets on Cisco NCS 4201 (As Per the Standard Kit)
Figure 5: Guiding the Cables from the Front Panel through the Cable Brackets
Cisco NCS 4201 Hardware Installation Guide
6
Installing the Cisco NCS 4201