Cisco WAP351 Schnellstart-Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drahtloser Zugangspunkt Cisco WAP351 herunter. Cisco WAP351 13 Seiten. Reboot and reset factory default settings
Auch für Cisco WAP351: Handbuch (4 seiten), Werksreset (4 seiten)

Seite drucken

Getting Started with the Configuration

To configure the Cisco WAP351, follow these steps to access the the web-

based Configuration Utility and then the Setup Wizard from your computer:

Connect the Cisco WAP351 to the same network (IP subnet) as your

TEP

computer. The factory default IP address configuration of the Cisco

WAP351 is DHCP. Make sure that your DHCP server is running and

can be reached.

See

"Incorrect IP Address"

you do not have a DHCP server.

Locate the IP address of the Cisco WAP351.

TEP

The Cisco WAP351 can be accessed and managed by Cisco

network tools and services including the Cisco FindIT Network

Discovery Utility that enables you to automatically discover all

supported Cisco devices in the same local network segment

as your computer. You can get a snapshot view of each device

or launch the product configurationutility to view and

configure the settings. For more information, see

www.cisco.com/go/findit.

b. The Cisco WAP351 is Bonjour-enabled and automatically

broadcasts its services and listens for services being

advertised by other Bonjour-enabled devices. If you have a

Bonjour-enabled browser, such as Microsoft Internet Explorer

with a Bonjour plug-in, or the Apple Mac Safari browser, you

can find the Cisco WAP351 on your local network without

knowing its IP address.

You can download the complete Bonjour for Microsoft Internet

Explorer browser from Apple's website by visiting:

http://www.apple.com/bonjour/

Locate the IP address assigned by your DHCP server by

accessing your router or DHCP server. See your DHCP server

instructions for more information.

Launch a web browser, such as Microsoft Internet Explorer.

TEP

In the address bar, enter the default DHCP address and press the

TEP

Enter key.

Enter the default user name of cisco and password of cisco in the

TEP

Username and Password fields.

Click Log In. The Wireless Access Point Setup Wizard appears.

TEP

Cisco WAP351 Quick Start Guide

for troubleshooting information, or if