Cisco WAP351 Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Cisco WAP351. Cisco WAP351 13 stron. Reboot and reset factory default settings
Również dla Cisco WAP351: Podręcznik (4 strony), Przywracanie ustawień fabrycznych (4 strony)
Drukuj stronę
Getting Started with the Configuration
6
To configure the Cisco WAP351, follow these steps to access the the web-
based Configuration Utility and then the Setup Wizard from your computer:
Connect the Cisco WAP351 to the same network (IP subnet) as your
S
1
TEP
computer. The factory default IP address configuration of the Cisco
WAP351 is DHCP. Make sure that your DHCP server is running and
can be reached.
See
"Incorrect IP Address"
you do not have a DHCP server.
Locate the IP address of the Cisco WAP351.
S
2
TEP
a.
The Cisco WAP351 can be accessed and managed by Cisco
network tools and services including the Cisco FindIT Network
Discovery Utility that enables you to automatically discover all
supported Cisco devices in the same local network segment
as your computer. You can get a snapshot view of each device
or launch the product configurationutility to view and
configure the settings. For more information, see
www.cisco.com/go/findit.
b. The Cisco WAP351 is Bonjour-enabled and automatically
broadcasts its services and listens for services being
advertised by other Bonjour-enabled devices. If you have a
Bonjour-enabled browser, such as Microsoft Internet Explorer
with a Bonjour plug-in, or the Apple Mac Safari browser, you
can find the Cisco WAP351 on your local network without
knowing its IP address.
You can download the complete Bonjour for Microsoft Internet
Explorer browser from Apple's website by visiting:
http://www.apple.com/bonjour/
c.
Locate the IP address assigned by your DHCP server by
accessing your router or DHCP server. See your DHCP server
instructions for more information.
Launch a web browser, such as Microsoft Internet Explorer.
S
3
TEP
In the address bar, enter the default DHCP address and press the
S
4
TEP
Enter key.
Enter the default user name of cisco and password of cisco in the
S
5
TEP
Username and Password fields.
Click Log In. The Wireless Access Point Setup Wizard appears.
S
6
TEP
Cisco WAP351 Quick Start Guide
for troubleshooting information, or if
7