Cisco WAP571 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drahtloser Zugangspunkt Cisco WAP571 herunter. Cisco WAP571 6 Seiten. Manually connect access points to the network via power over ethernet (poe)
Auch für Cisco WAP571: Schnellstart-Handbuch (15 seiten), Handbuch (4 seiten)
Seite drucken
or WAP571E Wireless Access Point.
Connect the WAP571E to the Network via PoE
Prepare the Cabling
Step 1. Disassemble the weather-proof connector to expose the red rubber gasket. After
disassembling, you should have the following:
1.
1 Thick rubber gasket
2.
Part B of the weather-proof connector
3.
Thin rubber gasket
4.
Part A of the weather-proof connector
Step 2. Slide the Ethernet cable through Part B of the weather-proof connector.
Step 3. Pinch the thick rubber gasket to reveal the cut and then slide the Ethernet cable through
the cut.