Cisco WAP571 Hızlı Başlangıç Kılavuzu - Sayfa 2
Kablosuz Erişim Noktası Cisco WAP571 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco WAP571 6 sayfaları. Manually connect access points to the network via power over ethernet (poe)
Ayrıca Cisco WAP571 için: Hızlı Başlangıç Kılavuzu (15 sayfalar), Manuel (4 sayfalar)
Sayfayı Yazdır
or WAP571E Wireless Access Point.
Connect the WAP571E to the Network via PoE
Prepare the Cabling
Step 1. Disassemble the weather-proof connector to expose the red rubber gasket. After
disassembling, you should have the following:
1.
1 Thick rubber gasket
2.
Part B of the weather-proof connector
3.
Thin rubber gasket
4.
Part A of the weather-proof connector
Step 2. Slide the Ethernet cable through Part B of the weather-proof connector.
Step 3. Pinch the thick rubber gasket to reveal the cut and then slide the Ethernet cable through
the cut.