Cisco Wap581 Handbuch
Blättern Sie online oder laden Sie pdf Handbuch für Drahtloser Zugangspunkt Cisco Wap581 herunter. Cisco Wap581 10 Seiten. Reboot and reset to factory default settings
Auch für Cisco Wap581: Schnellstart-Handbuch (14 seiten), Schnellstart-Handbuch (17 seiten)
Seite drucken
Reboot and Reset the WAP125 and WAP581
to Factory Default Settings
Objective
Rebooting or restarting the Wireless Access Point (WAP) deletes the logs stored in the
volatile memory. This process is performed when certain changes in the settings need a
reboot or if the WAP is not responding or booting up properly. Resetting the WAP to factory
default settings, on the other hand, erases all configurations that have been set by the user,
and restores the device to its original settings. A reset is recommended if most of the WAP
settings need to be reconfigured.
This article aims to show you how to reboot and reset your WAP125 or WAP581 to factory
default settings.
Applicable Devices
WAP125
WAP581
Software Version
WAP125 - 1.0.0.3
WAP581 - 1.0.0.4
Reboot the Wireless Access Point
There are two ways to reboot the WAP:
Hardware reboot
Reboot through the web-based utility
Hardware Reboot
You have two ways to reboot the device hardware:
Turn the device off by pressing the POWER button while the device is connected to the power
outlet.