Cisco Wap581 Руководство

Просмотреть онлайн или скачать pdf Руководство для Беспроводная точка доступа Cisco Wap581. Cisco Wap581 10 страниц. Reboot and reset to factory default settings
Также для Cisco Wap581: Краткое руководство по эксплуатации (14 страниц), Краткое руководство по эксплуатации (17 страниц)

Reboot and Reset the WAP125 and WAP581

to Factory Default Settings

Objective

Rebooting or restarting the Wireless Access Point (WAP) deletes the logs stored in the

volatile memory. This process is performed when certain changes in the settings need a

reboot or if the WAP is not responding or booting up properly. Resetting the WAP to factory

default settings, on the other hand, erases all configurations that have been set by the user,

and restores the device to its original settings. A reset is recommended if most of the WAP

settings need to be reconfigured.

This article aims to show you how to reboot and reset your WAP125 or WAP581 to factory

default settings.

Applicable Devices

WAP125

WAP581

Software Version

WAP125 - 1.0.0.3

WAP581 - 1.0.0.4

Reboot the Wireless Access Point

There are two ways to reboot the WAP:

Hardware reboot

Reboot through the web-based utility

Hardware Reboot

You have two ways to reboot the device hardware:

Turn the device off by pressing the POWER button while the device is connected to the power

outlet.