Epson CX6600 - Stylus Photo Printer Start Here Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Start Here Handbuch für Alles in einem Drucker Epson CX6600 - Stylus Photo Printer herunter. Epson CX6600 - Stylus Photo Printer 8 Seiten. Epson scan icm updater v1.20 (psb.2008.07.001)
Auch für Epson CX6600 - Stylus Photo Printer: Informationshandbuch (4 seiten), Kurzanleitung (48 seiten), Start Here Handbuch (8 seiten), Handbuch (14 seiten), Handbuch aktualisieren (2 seiten), Setup-Handbuch (2 seiten), Update (1 seiten), Kurzanleitung (47 seiten), Betriebshandbuch (50 seiten)

Seite drucken

Epson CX6600 - Stylus Photo Printer Start Here Handbuch

Install Software and

Connect to Your Computer

The software works with Windows

OS 9.1.x to 9.2.x and 10.2.x to 10.3.x. Follow the steps below (for Windows),

or the steps in the next column (for Macintosh).

Note: There is a Security Lock program on your software CD-ROM that lets

you prevent unauthorized use of your CX6600. See the Quick Guide for

instructions on installing and using it.

Windows

Make sure the Stylus CX is not

connected to your computer,

then turn on your computer.

Note: If you see several New

Hardware Wizard screens, click

Cancel for each of these screens and

disconnect your Stylus CX. You can't

install your software that way.

Insert your Stylus CX software CD-ROM in your CD-ROM or DVD drive.

Wait until you see this screen,

then click Install.

Note: If you don't see this screen,

do the following:

For Windows XP: click Start >

My Computer. Then double-click

the Epson CD-ROM icon.

For Windows 98/Me/2000: double-click

Then double-click the Epson CD-ROM icon.

Read the license agreement, then click Agree. Several messages

display on your screen.

When you see this screen, make sure

your Stylus CX is turned on, then lift

up the scanner.

Remove the yellow

sticker and plug the

square end of the USB

cable into the USB port

on your Stylus CX.

Then route the cable in

the slot as shown.

Caution: Make sure the USB cable fits securely into the slot. The USB

connector may snap if the cable is not routed correctly in the slot and

the scanner is closed with force.

Close the scanner carefully.

Plug the flat end of the

cable into any available

USB port on your

computer.

Click Next and follow the

instructions on the screen to install

more software.

Note: It will take several minutes to install the software.

Don't cancel the installation.

At the completion screen, print a test page, if desired. When done,

click Next to install additional software.

98SE, Me, 2000, and XP, and Macintosh

My Computer.

continue