CabKing 6V3 Gebrauchsanweisung - Seite 17

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Sander CabKing 6V3 herunter. CabKing 6V3 20 Seiten.

Seite drucken

PROBLEM

PARTS ARE MISSING OR DAMAGED

MOTOR IS HOT

MOTOR MAKES A HIGH PITCH

SOUND

MOTOR VIBRATES OR SHAKES

WATER CONTROL KNOBS KEEP

SPINNING

WHEELS DON'T TURN

WATER FLOW IS WEAK OR DOESN'T

FLOW AT ALL

DRIP PANS DO NOT DRAIN

NOZZLE / WATER SYSTEM PARTS

ARE LOOSE OR FALL OFF

TROUBLESHOOTING

RECOMMENDED SOLUTION

EMAIL AT [email protected].

THIS IS NORMAL. BY DESIGN, THE MOTOR IS TOTALLY ENCLOSED AND

NON-VENTILATED SO IT PRODUCES HIGH TEMPERATURES. THE

TEMPERATURE RANGE IS 190°F - 220°F. AVOID CONTACT WITH THE

HOUSING.

THIS IS TYPICALLY DUE TO THE TABLE OR PLATFORM THAT THE

MACHINE IS PLACED ON. PLACE CARDBOARD OR CLOTH UNDER THE

MACHINE TO ABSORB THE VIBRATION.

MAKE SURE THE WHEELS ARE PROPERLY BALANCED. WHEELS CAN

BECOME UNBALANCED DURING SHIPPING. THIS CAN BE FIXED BY

TAKING THE WHEELS OFF AND REALIGNING THEM. MAKE SURE TO

TIGHTEN THE SHAFT PROPERLY.

TIGHTEN THE SET SCREW ON THE KNOB USING A FLAT HEAD

SCREWDRIVER.

MAKE SURE POWER IS CONNECTED AND MACHINE IS TURNED TO THE

ON POSITION.

MAKE SURE THE WHEELS ARE NOT OBSTRUCTED. IF THE WHEELS ARE

CAUGHT ON SOMETHING BEFORE YOU TURN ON THE MOTOR, THERE

WILL NOT BE ENOUGH MOMENTUM TO START SPINNING.

TURN WATER CONTROL KNOB SO IT WON'T TURN ANYMORE.

CHECK IF THERE IS WATER IN THE BUCKET WITH PUMP.

CHECK IF PUMP IS CONNECTED TO POWER SUPPLY.

CHECK ALL TUBING IS CONNECTED PROPERLY.

CLEAN NOZZLES AND Y-SPLITS WITH PIPE CLEANER

SHAKE THE DRIP TUBES TO START THE FLOW WHILE TILTING THE DRIP

PANS UP.

MAKE SURE DRIP PAN TUBING IS ANGLED DOWNWARD. TUBING

SHOULD ALSO BE CUT TO LENGTH AFTER SETTING UP UNIT.

CLEAN THE DRIP PAN OUTSPOUT.

WE SUGGEST USING SOME TEFLON TAPE AND WRAPPING THE PORTION

OF THE NOZZLE THAT IS INSERTED INTO THE Y-SPLIT WITH ENOUGH

TAPE TO TIGHTEN THE FIT.