Cisco EX90 Benutzerhandbuch - Seite 29

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Konferenz-System Cisco EX90 herunter. Cisco EX90 49 Seiten. Telepresence system
Auch für Cisco EX90: Benutzerhandbuch (50 seiten), Kurzreferenz-Handbuch (2 seiten), Benutzerhandbuch (37 seiten), Kurzreferenz-Handbuch (2 seiten), Handbuch "Erste Schritte (42 seiten), Benutzerhandbuch (45 seiten), Installationshandbuch (6 seiten), Kurzreferenz-Handbuch (2 seiten), Benutzerhandbuch (7 seiten), Handbuch zur Fehlersuche (37 seiten), Installationshandbuch (2 seiten), Benutzerhandbuch (45 seiten), Benutzerhandbuch (37 seiten), Handbuch "Erste Schritte (46 seiten)

Cisco TelePresence System EX90

Contents

Introduction

Setting the EX90 in standby

Outside a call, you may have the unit enter standby mode by touching the

Power button on the main unit (the screen). The Standby dialog is displayed

and the unit enters standby immediately. This does not work when you are in a

call.

Shutting down the EX90

Outside a call, press the Power button until the Shutdown progress bar is filled

completely.

Release the button and the unit will go in shutdown in just a few seconds.

D14724.09

User guide EX90, TC5.1, January 2013

Connecting the EX90

Using the EX90

Tap as shown to

wake up the system

from standby.

To start the system again,

press the Power button

until the LED illuminates

(green light).

Scheduled meetings

Reverting to factory default settings

to revert to the factory default settings, do as follows:

Disconnect the power cord.

Reconnect the power cord—a green light will illuminate shortly after.

Press the Power button as soon as the green light appears. Keep it de-

pressed for 15 seconds or so, until the green light starts flashing.

Release the button and press twice within 2 seconds. All settings will now

revert to factory default settings.

User guide

The settings