Cable Electronics HSW44C Plus Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Matrix Switcher Cable Electronics HSW44C Plus herunter. Cable Electronics HSW44C Plus 17 Seiten. 4x4 hdmi matrix switch with cat5 output and up to 60khz ir

Seite drucken

Supported IR Data Format

Data Format

NEC

RC5

TOSHIBA MICOM CODE

GRUNDIG CODE

SONY 12 BIT CODE

SONY 15 BIT CODE

SONY 20 BIT CODE

RCA CODE

RCM CODE

MATSUSHITA CODE

MISUBISHI CODE

ZENITH CODE

JVC CODE

M50560-001P

MN6125L

MN6014_C5D7

MN6014-C6D6

MC14457P

LC7464(AHEA)

GEMINI_CM

Suitable

Not Recommended

Hardware Installation

HSW44C Plus as master

1. Connect all sources to HDMI Inputs on the 4x4 HDMI over CAT5 matrix master HSW44C

Plus

2. Connect each DDC output on the HSW44C Plus to respective DDC input on the remote

receiver HSMR Plus

3. Connect each TMDS output on the HSW44C Plus to respective TMDS input on the remote

receiver HSMR Plus

4. Connect IR blaster to the HSW44C Plus and direct the IR blaster to point towards the

built-in IR receiver of the HDMI source devices

5. Connect the +5V 6A DC power supply to the HSW44C Plus

6. Power on all HDMI sources

7. Power on the HSW44C Plus

HSMR Plus as receiver

1. Connect each HDMI output to HDMI displays

2. Connect the TMDS input on the HSMR Plus to the TMDS output on the HSW44C Plus

3. Connect the DDC input on the HSMR Plus to the DDC output on the HSW44C Plus

4. Connect IR receiver and place the IR receiver at the appropriate position that can

receive the IR signals sent from the users

5. Dial the 8-level rotary control switch to adjust the HDMI signal level until the picture

and sound are clear. It is recommended to dial from 7 to 0 to find the optimal visual

experience