Cable Electronics HSW44C Plus Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Matrix Switcher Cable Electronics HSW44C Plus herunter. Cable Electronics HSW44C Plus 17 Seiten. 4x4 hdmi matrix switch with cat5 output and up to 60khz ir

Seite drucken

For example

Rename the Input1 to "Blu-ray player", Input2 to "Sat. receiver," input3 to "Game

console," input4 to "AV receiver," input5 to "HDMI camcorder," ... etc., and rename

output1 to "Conf. RM1," output2 to "Conf. RM2," output3 to "Lobby," output4 to "Main

projector," ... etc.

Click Save String Table to save the caption setting (turn effective after program restart).

Click Set Default to pop up the conﬁrmation message below to erase the captions and

reset the string table back to default setting (turn effective after program restart).

2. Scan button

Serial Port Scan

Click Scan button, the machine will scan

the all COM port and show them.

Select the RS232 serial port connected

to the Matrix switch.

And set device ID 255 is for all device.

Only the same device id or 255 can get

the command you sent.

Click OK. Get the new status from the

Matrix switch (the port you select.)

3. Linkage button

Click Linkage button to read back all status.

4. Open/Close button

Click Open/Close button to close or open COM port.

5. Mapping button

Select All Output

Select set all output, and then select the source on main menu. You can quickly set

all output to the same source.

Unselect All Output

Release output selection.

Select Input1~4 - Output

Select Input Source, and then select the output port icon.

For example

Select input source 1. Then select output ports one and two. The video and audio will

be sent to ports one and two.