Cisco TelePresence IP VCR 2200 Series Erste Schritte - Seite 6

Blättern Sie online oder laden Sie pdf Erste Schritte für Konferenz-System Cisco TelePresence IP VCR 2200 Series herunter. Cisco TelePresence IP VCR 2200 Series 15 Seiten.

Seite drucken

Connecting the VCR

Before you start

IMPORTANT

information at http://www.cisco.com/go/telepresence/safety.

Step one: Connect power

Connect the power connector on the rear of the unit to the power supply using the

supplied power cable. (There is no On/Off switch.)

Step two: Connect to Ethernet Port A

Connect an Ethernet cable from Ethernet Port A to an Ethernet switch (rather than a

hub, to minimize interference from other devices on the network). The Ethernet

port is a 10/100/1000 Mbps auto-sensing connection.

Only connect to Ethernet Port B if you need to connect the VCR to a

second subnet.

Do not connect Ethernet Port A and Ethernet Port B to the same subnet.

: Before installing the VCR, you must read the safety

Connecting the VCR