cable matters 201079 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gehege cable matters 201079 herunter. cable matters 201079 12 Seiten. Usb-c 10gbps gen 2 external sata ssd enclosure
Auch für cable matters 201079: Benutzerhandbuch (12 seiten)

Seite drucken

5. Troubleshooting Notes

Check that the STATUS LED is lit

•

Connect directly to a USB port (not through a hub or dock) as a test.

•

Hot-swapping the SSD is not supported and may corrupt the data.

•

Check with the SSD manufacturer for management and diagnostic software.

•

UASP, TRIM and S.M.A.R.T. support requires compatible equipment, drive and OS.

•

Disconnect the Enclosure, reboot the computer and reconnect the Enclosure.

•

Verify that your computer supports data transfer over USB-A or USB-C.

•

Test with a different USB cable. Replacement cables must support 10Gbps data transfer for the

•

maximum performance.

Test with a different USB-A or USB-C port on the computer.

•

Test with a different SATA drive. Drive must be initialized and formatted.

•

Windows OS:

Check to see if your computer recognizes the Enclosure: Device Manager > Storage controllers > USB

•

Attached SCSI (UAS) Mass Storage Device

macOS:

Check to see if your computer recognizes the Enclosure: About this Mac > System Report > USB

•

Device Tree

> USB 3.1 Bus > 235C

Contact [email protected] if you believe that the Enclosure is defective.

USB 3.1 Type-C™ External SATA SSD Enclosure