Cisco TelePresence SpeakerTrack 60 Handbuch - Seite 17
Blättern Sie online oder laden Sie pdf Handbuch für Konferenz-System Cisco TelePresence SpeakerTrack 60 herunter. Cisco TelePresence SpeakerTrack 60 22 Seiten. Telepresence
Auch für Cisco TelePresence SpeakerTrack 60: Datenblatt (3 seiten), Installationshandbuch (19 seiten), Installationshandbuch (14 seiten), Kamera-Handbuch (40 seiten), Kamera-Handbuch (44 seiten)
Seite drucken
- 1. Table of Contents
- 2. Appendix Factory Reset
- 3. Software
- 4. Connect Speakertrack 60 to SX80 Codec
- 5. Connect Speakertrack 60 to Codec C40
- 6. Connect Speakertrack 60 to Codec C60
- 7. Connect Speakertrack 60 to Codec C90
- 8. Precision 60
- 8. Speakertrack 60
- 8. Reset the Cameras
- 8. Appendix
- 8. Technical Specifications
- 8. Speakertrack 60
- 8. Contact Us
Cisco TelePresence Precision 60 and SpeakerTrack 60
Contents
SpeakerTrack 60
Factory resetting the device
A factory reset should only be performed by a system admin-
istrator or in contact with Cisco technical support.
The device will be reset to factory defaults, and all configura-
tion and logs will be erased.
REMOVE COVER
REMOVE COVER
If errors continue to occur, the cameras might have to be
reset, too. See the next page for instructions on how to reset
the cameras.
It is not possible to undo a factory reset.
To perform a factory reset:
1. Remove the top cover of the SpeakerTrack 60 device.
2. Locate the pin hole button at the top of the SpeakerTrack 60.
3. Use a pen or similar to press and hold the factory reset
button for 10 seconds.
4. The camera LED will be lit red during the factory reset.
Do not unplug power.
5. When the factory reset is complete, the device restarts
and the LED lights up.
D15296.03 Cisco TelePresence Precision 60 and SpeakerTrack 60, APRIL 2016.
Introduction
Physical interface
REMOVE COVER
REMOVE COVER
Connecting the camera
1
2
3
17
Camera guide
Factory reset
Factory reset
Appendix
P i n-h o l e fo r
factory reset
Copyright © 2016 Cisco Systems, Inc. All rights reserved.