Cisco TelePresence SpeakerTrack 60 매뉴얼 - 페이지 17

{카테고리_이름} Cisco TelePresence SpeakerTrack 60에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence SpeakerTrack 60 22 페이지. Telepresence
Cisco TelePresence SpeakerTrack 60에 대해서도 마찬가지입니다: 데이터시트 (3 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (14 페이지), 카메라 매뉴얼 (40 페이지), 카메라 매뉴얼 (44 페이지)

페이지 인쇄

Cisco TelePresence Precision 60 and SpeakerTrack 60

Contents

SpeakerTrack 60

Factory resetting the device

A factory reset should only be performed by a system admin-

istrator or in contact with Cisco technical support.

The device will be reset to factory defaults, and all configura-

tion and logs will be erased.

REMOVE COVER

If errors continue to occur, the cameras might have to be

reset, too. See the next page for instructions on how to reset

the cameras.

It is not possible to undo a factory reset.

To perform a factory reset:

1. Remove the top cover of the SpeakerTrack 60 device.

2. Locate the pin hole button at the top of the SpeakerTrack 60.

3. Use a pen or similar to press and hold the factory reset

button for 10 seconds.

4. The camera LED will be lit red during the factory reset.

Do not unplug power.

5. When the factory reset is complete, the device restarts

and the LED lights up.

D15296.03 Cisco TelePresence Precision 60 and SpeakerTrack 60, APRIL 2016.

Introduction

Physical interface

REMOVE COVER

Connecting the camera

Camera guide

Factory reset

Appendix

P i n-h o l e fo r

factory reset