Argo LUDVIG Betriebsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Klimagerät Argo LUDVIG herunter. Argo LUDVIG 20 Seiten.

WARNING!

Prior to carrying out any cleaning or maintenance, unplug the unit from the power socket.

1. Cleaning the air filters

The air filter must be checked at least once every two weeks of

operation. Operating with dirty or clogged filters will decrease the

effectiveness of the air conditioner and can cause serious problems. To

remove the filter, release the rear grille then slide out the filter by gently

pulling it sideways. Use a vacuum cleaner to remove any dust. Should

this not be sufficient, wash the filter with lukewarm water and neutral

detergent (if necessary), rinse it with cold water then leave it to dry

naturally before putting it back in place. After putting the filter back in

place, close the grille and resume use of the air conditioner.

2. Cleaning the casing

Use a soft damp cloth to clean the outer surface of the air conditioner.

Do not use excessively hot water, solvents, petrol or other aggressive

chemical compounds, talcum powder and brushes: they may damage

the surface or colour of the casing. Remove any stains using warm

water with a little neutral detergent. Do not pour water onto the air

conditioner to clean it: this may damage the internal components or

cause a short circuit.

3. Storage

When you do not envisage using the air conditioner for a long time, clean the filters before storing it away. Keep

the appliance in a vertical position at all times. Do not place any heavy objects on the top and, if possible, protect

the air conditioner with a plastic sheet.

4. Transport

Preferably keep the air conditioner in the vertical position when

transporting it. Should this not be possible, rest it on its right-hand

side; when it reaches its destination, immediately put the appliance

in the vertical position and wait at least 4 hours before using it in the

cooling mode.

5. For complete safety, regularly check the condition of the power cord; should it be damaged through use, contact

the Service Centre to replace it.

V 04/23

CARE AND MAINTENANCE