Argo LUDVIG Manuale di istruzioni per l'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Condizionatore d'aria Argo LUDVIG. Argo LUDVIG 20.
WARNING!
Prior to carrying out any cleaning or maintenance, unplug the unit from the power socket.
1. Cleaning the air filters
The air filter must be checked at least once every two weeks of
operation. Operating with dirty or clogged filters will decrease the
effectiveness of the air conditioner and can cause serious problems. To
remove the filter, release the rear grille then slide out the filter by gently
pulling it sideways. Use a vacuum cleaner to remove any dust. Should
this not be sufficient, wash the filter with lukewarm water and neutral
detergent (if necessary), rinse it with cold water then leave it to dry
naturally before putting it back in place. After putting the filter back in
place, close the grille and resume use of the air conditioner.
2. Cleaning the casing
Use a soft damp cloth to clean the outer surface of the air conditioner.
Do not use excessively hot water, solvents, petrol or other aggressive
chemical compounds, talcum powder and brushes: they may damage
the surface or colour of the casing. Remove any stains using warm
water with a little neutral detergent. Do not pour water onto the air
conditioner to clean it: this may damage the internal components or
cause a short circuit.
3. Storage
When you do not envisage using the air conditioner for a long time, clean the filters before storing it away. Keep
the appliance in a vertical position at all times. Do not place any heavy objects on the top and, if possible, protect
the air conditioner with a plastic sheet.
4. Transport
Preferably keep the air conditioner in the vertical position when
transporting it. Should this not be possible, rest it on its right-hand
side; when it reaches its destination, immediately put the appliance
in the vertical position and wait at least 4 hours before using it in the
cooling mode.
5. For complete safety, regularly check the condition of the power cord; should it be damaged through use, contact
the Service Centre to replace it.
V 04/23
CARE AND MAINTENANCE
34