Cisco 2100 Series Schnellstart-Handbuch - Seite 16

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware Cisco 2100 Series herunter. Cisco 2100 Series 49 Seiten. Cisco 8500 series wireless lan controller
Auch für Cisco 2100 Series: Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (50 seiten), Schnellstart-Handbuch (12 seiten)

Seite drucken

Table 1

Startup Wizard Information (continued)

Wizard Setting

Configure a RADIUS Server Now? [YES] [no]

Enter Country Code

Enable 802.11b Network

Enable 802.11a Network

Enable 802.11g Network

Enable Auto-RF

The controller saves your configuration, reboots, and prompts you to log in.

Logging into the Controller

Follow these steps to log into the controller.

Enter a valid username and password to log into the controller CLI.

Step 1

The administrative username and password you created in the startup wizard are case

Note

sensitive.

Action

If you select YES, you are prompted to enter the

following:

• RADIUS server IP address

• RADIUS server port (default port is 1812)

• RADIUS server secret

If you select no, the following message appears:

Warning! The default WLAN security policy

requires a RADIUS server. Please see

documentation for more details.

Enter the two letter country code. The default

country code is the United States (US). Enter help

to see a list of countries.

Choose YES to enable or no to disable the

802.11b radio network. The default is YES.

Choose YES to enable or no to disable the

802.11a radio network. The default is YES.

Choose YES to enable or no disable the 802.11g

radio network. The default is YES.

Choose YES to enable or no to disable radio

resource management. The default is YES.