Cisco 2100 Series Hızlı Başlangıç Kılavuzu - Sayfa 16
Ağ Donanımı Cisco 2100 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco 2100 Series 49 sayfaları. Cisco 8500 series
wireless lan controller
Ayrıca Cisco 2100 Series için: Yapılandırma Kılavuzu (40 sayfalar), Yapılandırma Kılavuzu (50 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Table 1
Startup Wizard Information (continued)
Wizard Setting
Configure a RADIUS Server Now? [YES] [no]
Enter Country Code
Enable 802.11b Network
Enable 802.11a Network
Enable 802.11g Network
Enable Auto-RF
The controller saves your configuration, reboots, and prompts you to log in.
Logging into the Controller
Follow these steps to log into the controller.
Enter a valid username and password to log into the controller CLI.
Step 1
The administrative username and password you created in the startup wizard are case
Note
sensitive.
16
Action
If you select YES, you are prompted to enter the
following:
• RADIUS server IP address
• RADIUS server port (default port is 1812)
• RADIUS server secret
If you select no, the following message appears:
Warning! The default WLAN security policy
requires a RADIUS server. Please see
documentation for more details.
Enter the two letter country code. The default
country code is the United States (US). Enter help
to see a list of countries.
Choose YES to enable or no to disable the
802.11b radio network. The default is YES.
Choose YES to enable or no to disable the
802.11a radio network. The default is YES.
Choose YES to enable or no disable the 802.11g
radio network. The default is YES.
Choose YES to enable or no to disable radio
resource management. The default is YES.