Cisco 5400 Series Installation von - Seite 5

Blättern Sie online oder laden Sie pdf Installation von für Netzwerk-Hardware Cisco 5400 Series herunter. Cisco 5400 Series 6 Seiten. Enterprise network compute system

Seite drucken

Installing the Device

Figure 5: Wall Mounting the Server

Powering On the Server

Note

When the power cord is connected to the system, both the management controller (CIMC) and the server is

automatically powered on. When the system is powered on, do not press the front-panel power button. If you

press the front-panel power button, it will power off the server, but the management controller (CIMC)

continues to be operational. You must press this button again to power on the server.

1. Attach the power cord to the power supply unit in the server and then attach the other end of the power

chord to the grounded power outlet.

2. Wait for approximately three minutes.

3. Verify the power status of the system by looking at the system power status LED. The power status LED

blinks in amber color during initial boot up and in solid amber when the system reaches the standby power

mode.

Powering On the Server

Installing the Device