Cisco 5400 Series Installation von - Seite 6

Blättern Sie online oder laden Sie pdf Installation von für Netzwerk-Hardware Cisco 5400 Series herunter. Cisco 5400 Series 6 Seiten. Enterprise network compute system

Seite drucken

Initial Server Setup

Local Connection Procedure

1. Ensure that the device is powered on.

2. Connect a keyboard and a monitor to the corresponding ports on the front panel of the device.

3. When you see the prompt, you can do the following:

4. After you have performed the required configuration, save the setup and continue to boot.

Remote Connection Procedure

1. Plug in your terminal server to the Serial CIMC port (Refer to Front panel of Chassis)

2. Telnet into the console and perform the necessary configuration using corresponding commands. You

can also configure the IP address for the Ethernet CIMC port.

Use CIMC to configure the box. For more details, see

Installing the Device

• Press F2 to get into the setup (BIOS) to change some settings.

• Press F8 to configure the IP address of the CIMC.

Initial Setup for UCS C-Series

Installing the Device

Servers.