Argo CLOE Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Heizgerät Argo CLOE herunter. Argo CLOE 12 Seiten. Ceramic table fan heater

Place the fan heater upright on a flat and stable surface.

Connect the power cord to an appropriate power outlet (220-240V ~ 50Hz).

Turn on the fan heater by pressing the ON / OFF switch located on the back of the product.

The POWER LED indicator turns on, while the others remain off.

Touch the POWER button to activate the fan heater.

During operation, do not touch or cover the front air delivery grille, this could cause overheating and activate the protection

device.

Connect the power cord to the power outlet, and press the ON / OFF switch located on the rear of the product, the power

reaches the unit and the device emits a beep, entering standby mode.

1. POWER button

Touch this button on the control panel to activate the fan heater operation. The LED

while all other LEDs are off and inoperative, except the Power button

When the fan heater is in standby mode, press the Power button once

On the control panel, the operation LED lights up

The fan heater starts operating at low heating power: the LED

power LED is off

V 05/21

HOW TO USE THE HEATER

CONTROL PANEL AND ACTIVABLE FUNCTIONS

Display

is lit on the control panel, while the high heating

lights up on the control panel,