Argo CLOE Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for Heater Argo CLOE. Argo CLOE 12 pages. Ceramic table fan heater
Print Page
Place the fan heater upright on a flat and stable surface.
Connect the power cord to an appropriate power outlet (220-240V ~ 50Hz).
Turn on the fan heater by pressing the ON / OFF switch located on the back of the product.
The POWER LED indicator turns on, while the others remain off.
Touch the POWER button to activate the fan heater.
During operation, do not touch or cover the front air delivery grille, this could cause overheating and activate the protection
device.
Connect the power cord to the power outlet, and press the ON / OFF switch located on the rear of the product, the power
reaches the unit and the device emits a beep, entering standby mode.
1. POWER button
Touch this button on the control panel to activate the fan heater operation. The LED
while all other LEDs are off and inoperative, except the Power button
When the fan heater is in standby mode, press the Power button once
a)
On the control panel, the operation LED lights up
b)
The fan heater starts operating at low heating power: the LED
power LED is off
V 05/21
HOW TO USE THE HEATER
CONTROL PANEL AND ACTIVABLE FUNCTIONS
1
2
.
Display
3
4
.
.
is lit on the control panel, while the high heating
5
lights up on the control panel,
19