Argo WALLNER HC1601 Gebrauchsanweisung - Seite 11
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Aktenvernichter Argo WALLNER HC1601 herunter. Argo WALLNER HC1601 16 Seiten.
INStALLAtION
1. Unpack and set machine upright.
2. Put the machine on a horizontal surface.
3. Place the shredder on top of the wastebasket.
4. Plug in the machine.
5. The socket-outlet should be installed near the equipment and shall be easily accessi-
ble.
6. To turn on the shredder, slide the top cover towards the rear of the shredder by placing
both thumbs in the recessed circles located on the top of the shredder.
7. The shredder is now ready to use.
OPERAtION BUttONS AND INDICAtORS
The operation buttons and indicators are situated under the sliding top cover.
- forward button
- reverse button
auto on LeD - lights up when the shredder is ready to use
overheat LeD – lights up when ovearheat occures
overload LeD - lights up when ovearload occures
bin full LeD - lights up when the wastebasket is full
OPERAtING thE ShREDDER
With the sliding Top in the open position, the wastebasket properly inserted into the
shredder cabinet and the power cable plugged in, the shredder is now ready to use. When
the paper is inserted into the shredder's entry, the shredding process starts automatically
and stops when the process is finished.
FEEDING thE ShREDDER
The hc1601 will shred up to 16 sheets of paper and will accept paper widths up to 220
mm. When shredding small material like envelopes, receipts or a credit card insert them
in the middle of the entry. cD's. DVD's should be placed in the designated slot marked for
cDs and DVDs.
© ArGO s.A.
EN
11
www.argo.pl