Cisco Aironet 340 Series Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware Cisco Aironet 340 Series herunter. Cisco Aironet 340 Series 12 Seiten. Usb client adapter
Auch für Cisco Aironet 340 Series: Schnellstart-Handbuch (12 seiten), Schnellstart-Handbuch (13 seiten), Anmerkungen zur Veröffentlichung (14 seiten), Schnellstart-Handbuch (16 seiten), Schnellstart-Handbuch (12 seiten)

Connect and Power Up the Bridge

Note: Before you install the bridge system, we recommend that you test the bridge using the

2.2 dBi antenna included in the package. Then install the wireless bridge with the appropriate

antenna for your application. A lightning arrestor and low-loss antenna cable are included in

the optional antenna kits or can be ordered separately.

Installing the Antenna

If applicable, with the unit powered off, attach a lightning arrestor to the antenna

connector.

Note: The lightning arrestor provides surge protection to the bridge in the event of a lightning

strike and is highly recommended if the antenna will be located outdoors.

Antenna connector

Connect one end of the low-loss antenna cable to the lightning arrestor connected to the

bridge antenna connector.

Note: Because of FCC and DOC regulations, the antenna connector on the Aironet bridge is

of reverse polarity to the standard TNC connectors.

Connect the other end of the antenna cable to the 2.2 dBi antenna or to an external

high-gain antenna.

Mount the bridge antenna at an appropriate elevation to ensure maximum path clearance

and line-of-sight to the other bridge or device.

The Aironet wireless Ethernet bridge supports three connection types: 10Base2 (Thinnet),

10Base5 (Thicknet), or 10BaseT (twisted pair). Connect only one Ethernet cable to each

bridge. With the power off, connect the appropriate cable from your network to the bridge.

1 0 B a s e