Cisco ASA 5506W-X Konfigurationshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Netzwerk-Hardware Cisco ASA 5506W-X herunter. Cisco ASA 5506W-X 13 Seiten. Threat defense reimage guide
Auch für Cisco ASA 5506W-X: Schnellstart-Handbuch (10 seiten), Schnellstart-Handbuch (14 seiten), Handbuch zur einfachen Einrichtung (11 seiten), Software-Handbuch (37 seiten), Montieren und anschließen (12 seiten), Installationshandbuch (46 seiten), Montieren Sie das Fahrgestell (10 seiten)

Prerequisites

This document only applies to the initial configuration of a Cisco ASA5506W-X device that

contains a wireless access point and is only intended to address the various changes needed

when you modify the existing IP addressing scheme or add additional wireless VLANs. For default

configuration installations, the existing

Requirements

Cisco recommends that you have knowledge of these topics:

Cisco ASA 5506W-X device

Client machine with a terminal emulation program such as Putty, SecureCRT, etc.

Console Cable and Serial PC Terminal Adapter (DB-9 to RJ-45)

Components Used

The information in this document is based on these software and hardware versions:

Cisco ASA 5506W-X device

Client machine with a terminal emulation program such as Putty, SecureCRT, etc.

Console Cable and Serial PC Terminal Adapter (DB-9 to RJ-45)

ASA FirePOWER Module

Integrated Cisco Aironet 702i wireless access point (Built-in WAP)

The information in this document was created from the devices in a specific lab environment. All of

the devices used in this document started with a cleared (default) configuration. If your network is

live, make sure that you understand the potential impact of any command.

Network Diagrams

As shown in this image, examples of the IP addressing that will be applied in two different

topologies:

ASA + FirePOWER with an inside switch:

ASA 5506-X Quick Start Guide

must be referenced.