Cisco ASA 5508-X Hardware-Installationshandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Netzwerk-Hardware Cisco ASA 5508-X herunter. Cisco ASA 5508-X 32 Seiten. Threat defense reimage guide
Auch für Cisco ASA 5508-X: Schnellstart-Handbuch (8 seiten), Handbuch zur einfachen Einrichtung (11 seiten), Schnellstart-Handbuch (9 seiten), Software-Handbuch (37 seiten), Montieren und anschließen (6 seiten), Handbuch (14 seiten)

Seite drucken
Cisco ASA 5508-X Hardware-Installationshandbuch

Connect Cables, Turn on Power, and Verify Connectivity

We recommend that you install the chassis with the rear panel facing the cold aisle. (See the following illustration for
an example of air flow from back to front.)
Figure 18: Chassis Installed in the Rack
What to Do Next
You can now install the cables and power cord, as described in
Connectivity, on page
Connect Cables, Turn on Power, and Verify Connectivity
After positioning or mounting the ASA, follow these steps to connect cables, turn on power, and verify
connectivity:
Step 1
Connect the network cables:
a) Management interface – Using this Management 1/1 Gigabit Ethernet port, you can connect a management computer
directly with an Ethernet cable, or you can connect the computer and the ASA to the same management network. Be
sure the PC is configured to obtain an IP address using DHCP.
Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide
22
22.
Mount and Connect
Connect Cables, Turn on Power, and Verify
Online Only