Cisco ASA 5508-X 하드웨어 설치 매뉴얼 - 페이지 26
{카테고리_이름} Cisco ASA 5508-X에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5508-X 32 페이지. Threat defense reimage guide
Cisco ASA 5508-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 간편한 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (9 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (6 페이지), 매뉴얼 (14 페이지)
페이지 인쇄
Connect Cables, Turn on Power, and Verify Connectivity
We recommend that you install the chassis with the rear panel facing the cold aisle. (See the following illustration for
an example of air flow from back to front.)
Figure 18: Chassis Installed in the Rack
What to Do Next
You can now install the cables and power cord, as described in
Connectivity, on page
Connect Cables, Turn on Power, and Verify Connectivity
After positioning or mounting the ASA, follow these steps to connect cables, turn on power, and verify
connectivity:
Step 1
Connect the network cables:
a) Management interface – Using this Management 1/1 Gigabit Ethernet port, you can connect a management computer
directly with an Ethernet cable, or you can connect the computer and the ASA to the same management network. Be
sure the PC is configured to obtain an IP address using DHCP.
Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide
22
22.
Mount and Connect
Connect Cables, Turn on Power, and Verify
Online Only