Sony MHC-EX5 Betriebsanleitung - Seite 17

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-EX5 herunter. Sony MHC-EX5 29 Seiten.

Seite drucken

One side

bok toot

sacri

Numeric

buttons

Recording always stops at the end of the

reverse side. Be sure to start from the

front side.

4 Press EDIT until "TIME EDIT" appears

in the display.

Time Eo

5 Tum ke AMS PPI clockwise or

counterclockwise to designate the tape

length or "--.—".

Choose the indication for tapes of

corresponding minute length.

As you tum kl AMS PP, the

indication changes as follows:

oe C-AB C54

(23.00) (27.00) >

€-90-+C-74-+C-60

(45.00) (37.00) (30.00)

To specify the recording time

Press CD on the remote. Use the

numeric buttons (1 to 10) to specify the

recording time on each side of the

cassette.

e.g. To specify 11 minutes 30 seconds,

press 1, 1, 3, 10.

6 Press EDIT.

The player determines the tracks to be

recorded on side A automatically and

""B" flashes in the display.

Tracks to be recorded for side A

Total playing time for side A

7 When you record on both sides, press

EDIT again.

The player determines the tracks to be

recorded on side B.

Tracks to be recorded for side A and B

Total playing time for side B

8 Press CD SYNCHRO.

Deck B stands by for recording.

The > (for front side) or <J (for

reverse side) indicator lights steadily

and shows you which side will start

recording. The other indicator flashes for

a few seconds, then disappears.

9 if the indicator for the side you want to

start recording does not light, press >>

or <<J to light the side to start recording.

If it lights, skip to step 10.

Press 11 PAUSE on the tape player to

release recording pause.

Recording starts.

If the last track on side A has abruptly

been cut, the track will record again

from the beginning on side B when you

choose dual-sided recording.

If you set DIRECTION MODE to > or

RELAY, recording always stops at the

end of the reverse side.

To stop recording

Press 0 on deck B or on the CD player.

To select the desired tracks

beforehand

You can place priority on some tracks to be

recorded by selecting them before

programming them up to 20 tracks. See

"Playing Tracks in the Desired Order

(programme play)."

To check the order

Each time you press CHECK, the

programme for side A, "P'' (pause) and the

programme for side B appear in order.

To cancel time edit

Before you press EDIT on step 4, press 0 to

cancel. If you want to cancel after you press

EDIT on step 6, press PLAY MODE.

Chapter 4: the Tape Player