Sony MHC-EX5 Betriebsanleitung - Seite 18

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-EX5 herunter. Sony MHC-EX5 29 Seiten.

Seite drucken

[eR

Recording a CD:

Specifying Track

Order (programme

edit)

You can adjust the total recording time to

the tape length while making a programme.

WwW

NOU

1 Following the procedure "Playing

Tracks in the Desired Order

(programme play)", programme the

tracks you want to record for side A.

Make sure that "A" is lit in the display.

Make sure to programme the tracks so

that the total playing time of side A does

not exceed the tape length of one side.

2 Press Uf on the remote.

"Pp" and "B" appear in the display and

the total playing time is reset to "0.00".

3 Programme the tracks you want to

record for side B as the same as the

side A.

Chapter 4: the Tape Player

4 select dual or single-sided recording.

To record

MODE to

One side

—-

Both sides*

C> or RELAY

Recording always stops at the end of the

reverse side. Be sure to start from the

front side.

5 Press CD SYNCHRO.

Deck B stands by for recording.

The C> (for front side) or << (for

reverse side) indicator lights steadily

and shows you which side will start

recording. The other indicator flashes for

a few seconds, then disappears.

6 Ir the indicator for the side you want to

start recording does not light, press >

or <J to light the side to start recording.

If it lights, skip to step 7.

7 Press 11 PAUSE on the tape player to

release recording pause.

Recording starts. You can also start

recording by pressing >> or <I.

If the last track on side A has abruptly

been cut, the track will record again

from the beginning on side B when you

choose dual-sided recording.

If you set DIRECTION MODE to ©

RELAY, recording always stops at the

end of the reverse side.

To stop recording

Press 0 on deck B or on the CD player.

Recording From the

Radio

You can record from the tuner onto a tape.

Use any type of tape.

Use the buttons on the unit to do this

operation.

Set DIRECTION

1 Press BAND several times until the

desired radio band appears.

2 Tune in the radio station you want to

record. (See "Listening to the Radio", or

"Playing Preset Radio Stations" for

details.)

3 Press & EJECT and insert a blank tape

' into deck B.

* Make sure the tabs on the cassette have

not been removed.

select dual or single-sided recording.

To record

Set DIRECTION

MODE to

One side

—

Both sides*

or RELAY

Recording always stops at the end of the

reverse side. Be sure to start from the

front side.

5 When you want to reduce the hiss noise

in low-level high-frequency signals,

switch DOLBY NR selector to B or C.

Dolby C provides greater noise

reduction benefit than Dolby B.

6 Press @ REC.

Deck B stands by for recording.

The C> (for front side) or <I (for

reverse side) indicator lights steadily

and shows you which side will start

recording. The other indicator flashes for

a few seconds, then disappears.

7 if the indicator for the side you want to

start recording does not light, press >

or <<] to light the side to start recording.

If it lights, skip to step 8.

8 press ff PAUSE on the tape player to

release recording pause.

Recording starts. You can also start

recording by pressing [=> or <1].

To stop recording

Press 0 on deck B.